En361 Fall Arrest Harness Yl-S302

• Customization: Available
• Type: High Operating Safety Belts
• Safety Belts Material: Polyester
• Model NO.: YL-S302
• Certification: ISO, EN361
• Safety Belts, Safety Ropes Length/Meter: 1.5m-2m
• Fixed Mode: Five-Point
• Strength: ≥25KN
• Color: Can Be Customized as Require
• Webbing Width: 45mm
• Delivery Time: for 1X20FT Container, Within 35 Days Against Order
• Transport Package: Many Packagings Available as Below Picture
• Trademark: YaleCoagent/OEM
• Origin: Hangzhou, Zhejiang, China
• Production Capacity: 10000sets/Month

Product Description

Product Description

Product Model	YL-S302
Standard	Meet EN361 & ANSI Z359.1
Webbing Material	100% high tenacity polyester
Webbing Width	45mm
Webbing Strength	30KN (6500lbs)
Color	Can be customized as require
Size	Free size
Features	1)with 1 forging D-rings and 5 adjustable points

Application
Full body harness is used for a variety of activities, including construction work, rescuing, firefighting , rock climbing, ship building and bridge working, etc. It helps to prevent injury or death from fall.

Packaging
Generally, each piece in color box or non-woven bag packing, but we have more packagings for customer's choice. Costs for different packing are a little bit difference.


We Have More Models of Full Body harness:

Before we quote accurately, we need to know:
1.Quantity you need
2.The models you are interested in
3.Packaging requirements
4.Trade Term: FOB, CIF, CNF, or else

Contact Me
I am waiting to offer my best service to you. Your inquiry and questions are all welcomed. Pls free feel to contact me.
Ms Tracy Zou
 
Tel:[phone];
Fax:[phone]; 
Mob:[phone]
 
 
Linkedin: [email protected]

FAQ
===>Features of Full Body Harness
1. Full body harness is designed as body support primarily for fall arrest purposes, i.e. a component of a fall arrest system and complies with EN361:2002.
2. Features for Basic Equipments:
-Back attaching buckle- for attaching fall arrest system;
-Connecting and adjusting buckle- for comfort wearing and using of harness
-Soft waist pad- for long time suspending working
-Tongue Buckle Waist Belt and leg strap- for quick adjustment
3.Service Life and Tips:
Full body harness can be used for 5 years counting from the date of putting the harness into operation. 
After this period the harness must be withdrawn from use to carry out manufacturer's detailed inspection. Check before use each time, keep in dry and avoid the sunlight.

===>How to Put on Full Body Harness

1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks. Pull one and the other thigh strap through the crotch and latch each strap. Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder. Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm EN362, always connected to both eyes and locked. It is always recommended its use, even if you are using the dorsal tightening ring.

===>Harness is put on correctly if:
-All straps are correctly adjusted (neither too loose nor too tight).
-Back attaching buckle is correctly positioned at the level of the shoulder blades.
-Front chest strap is correctly positioned at the middle of the chest.
-The ends of all the straps must be kept by plastic loops.